MDT RF Actuators

Sort By:  
KNX RF+ Socket, 230VAC, 16A
109.04€
KNX RF+ Switch Actuator 1-fold, flush mounted, 10A, 230VAC
117.16€
KNX RF+ Switch Actuator 2-fold, flush mounted, 10A, 230VAC
125.86€
KNX RF+ Socket, 230VAC, 16A, with active power measurement
125.86€
KNX RF+ Shutter Actuator 1-fold, flush mounted, 10A, 230VAC
125.86€
RF-AKK1ST.01 (045.018)
RF KNX RF+ Socket
Description: The MDT KNX RF+ Socket receives KNX/EIB telegrams and switches one electrical load.

  • Production in Germany, certified according to ISO 9001
  • New KNX RF+ protocol in system mode
  • Commissioning with ETS5
  • NO and NC contact operation
  • Time functions (switch-on/switch-off delay, staircase light function)
  • Status response (active/passive) for each channel
  • Logical linking of binary data
  • 8 scenes per channel
  • Central switching functions and block functions
  • Adjustable behavior in case of bus voltage failure or return
  • Connection via MDT KNX RF+ Line Coupler

KNX RF+ Socket, 230VAC, 16A
109.04€
RF-AKK1UP.01 (045.014)
RF KNX RF+ Switch Actuator
Description: The MDT KNX RF+ Switch Actuator receives KNX/EIB telegrams ans switchs up to 2 indipendent electrical loads. Each output uses a monostable relay.

  • Production in Germany, certified according to ISO 9001
  • New KNX RF+ protocol in system mode
  • Commissioning with ETS5
  • NO and NC contact operation
  • Time functions (switch-on/switch-off delay, staircase light function)
  • Status response (active/passive) for each channel
  • Logical linking of binary data
  • 8 scenes per channel
  • Central switching functions and block functions
  • Adjustable behavior in case of bus voltage failure or return
  • Flush mounted in socket
  • Connection via MDT KNX RF+ Line Coupler
  • To upgrade your installation without placing KNX bus cables
  • Power supply 230VAC
  • Dimensions (W x H x D): 41mm x 41mm x 22mm
  • Integrated bus coupling unit

KNX RF+ Switch Actuator 1-fold, flush mounted, 10A, 230VAC
117.16€
RF-AKK2UP.01 (045.015)
RF KNX RF+ Switch Actuator
Description: The MDT KNX RF+ Switch Actuator receives KNX/EIB telegrams ans switchs up to 2 indipendent electrical loads. Each output uses a monostable relay.

  • Production in Germany, certified according to ISO 9001
  • New KNX RF+ protocol in system mode
  • Commissioning with ETS5
  • NO and NC contact operation
  • Time functions (switch-on/switch-off delay, staircase light function)
  • Status response (active/passive) for each channel
  • Logical linking of binary data
  • 8 scenes per channel
  • Central switching functions and block functions
  • Adjustable behavior in case of bus voltage failure or return
  • Flush mounted in socket
  • Connection via MDT KNX RF+ Line Coupler
  • To upgrade your installation without placing KNX bus cables
  • Power supply 230VAC
  • Dimensions (W x H x D): 41mm x 41mm x 22mm
  • Integrated bus coupling unit

KNX RF+ Switch Actuator 2-fold, flush mounted, 10A, 230VAC
125.86€
RF-AZK1ST.01 (045.019)
RF KNX RF+ Socket
Description: The MDT KNX RF+ Socket receives KNX/EIB telegrams and switches one electrical load.

  • Production in Germany, certified according to ISO 9001
  • New KNX RF+ protocol in system mode
  • Commissioning with ETS5
  • NO and NC contact operation
  • Time functions (switch-on/switch-off delay, staircase light function)
  • Status response (active/passive) for each channel
  • Logical linking of binary data
  • 8 scenes per channel
  • Central switching functions and block functions
  • Adjustable behavior in case of bus voltage failure or return
  • Connection via MDT KNX RF+ Line Coupler

KNX RF+ Socket, 230VAC, 16A, with active power measurement
125.86€
RF-JAL1UP.01 (045.016)
RF KNX RF+ Shutter Actuator
Description: The MDT KNX RF+ Shutter Actuator receives KNX/EIB telegrams and controls 1 indipendent shutter or sunblind drive. The output uses two monostable relays.

  • Production in Germany, certified according to ISO 9001
  • New KNX RF+ protocol in system mode
  • Commissioning with ETS5
  • Operation mode blind/shutter programmable
  • Travel-, pause-at-change-of-direction- and step time adjustable
  • 1Bit automatic function and sun protection
  • 8Bit positioning for shutter and blinds
  • 8 scenes per channel
  • Programmable behavior in case of bus voltage failure or return
  • Flush mounted in socket
  • Connection via MDT KNX RF+ Line Coupler
  • To upgrade your installation without placing KNX bus cables
  • Power supply 230VAC
  • Dimensions (W x H x D): 41mm x 41mm x 22mm
  • Integrated bus coupling unit

KNX RF+ Shutter Actuator 1-fold, flush mounted, 10A, 230VAC
125.86€
Per Page      1 - 5 of 5
  • 1