Controllers

ACC-SOPAN Solar Panel Power.

Rated Power: 5W.
Max Power: 10.12W / Max Current: 0.28A.
Operating: -40°C ~ 85°C.
Weight: 0.6kg.

UC100 Inputs & outputs (terminal blocks).
UC100 Series.

1x RS485 (Modbus) – Support 16 reading register values.
1x Reset / 5-24VDC by terminal block or 5VDC by USB type C.
Power Supply included.
IF-THEN commands for no-network operation.
LoRa D2D protocol for Milesight devices (without gateway), programmable via USB-C.
IP30 rated / -20°C ~ +60°C.

UC300 Inputs & outputs (terminal blocks).
UC300 Series.

1x RS232 + 1x RS485 (Modbus).
4x DI / 2xDO.
2x 4…20 mA Analog Input.
2x 0…10 V Analog Input.
2x PT100 RTD Analog Input.
1x Reset / Power Supply included.
IF-THEN commands for no-network operation.
LoRa D2D protocol for Milesight devices (without gateway), programmable via USB.

UC501 NFC enabled / M12 Connectors / 2 Data cables for Interfaces.
Solar Powered, IP67

Interface 1:
2x GPIO / 1RS232/RS485 (Switchable).
13.3V Output / 15/9/12V Output (Switchable).

Interface 2:
2x Analog Input 13.3V Output / 15/9/12V Output (Switchable).
Solar Power Option: Solar Powered with 22550 mAh Batteries / 5-24VDC.
IP67 rated, programmable via USB / NFC.

UC502 NFC enabled / M12 Connectors / 2 Data cables for Interfaces.
Battery Powered, IP67

Interface 1:
2x GPIO / 1RS232/RS485 (Switchable).
13.3V Output /15/9/12V Output (Switchable).

Interface 2:
2x Analog Input 13.3V Output /15/9/12V Output (Switchable).
Battery Power Option: 39000mAh. Replaceable Lo-SOCL2 Batteries / 5-24VDC.
IP67 rated.

WS558 PN-LN
8x Active Outputs.

Input Voltage: 100~250VAC, 50~60Hz.
Output: 8 Active Outputs.
Capacitive & Inductive Load: Max 5A/Output, Total 16A.
Resistive Load: Max 10A/Output, Total 16A.
Electrical Measurement: Voltage (VAC), Current (mA), Power Factor (%), Power (W), Power Consumption (kWh).

WS558 PN-SWITCH
8x Passive Outputs.

Input Voltage: 100~250VAC, 50~60Hz.
Output: 8 Passive switches.
Capacitive & Inductive Load: Max 5A/Switch.
Resistive Load: Max 10A/Switch.