MDT Technologies
Analog In-/Output 2-fold, Flush mounted, input voltage 0-12V/2-10V or current loop 0-20mA/4-20mA, output voltage 0-10V
Analog In-/Output 4-fold, input voltage 0-12V/2-10V or current loop 0-20mA/4-20mA, output voltage 0-10V
LED Controller 4-channel, 2/4A, 2SU, MDRC device, for 12/24V CV LED / 4 separate channels RGBW, TW
AIO-0210V.xx (042.013)
AIO Analog IN-/Output
Description: The MDT Analog In-/Output is suitable to control devices with 0-10V inputs and to catch 0-20mA/0-10V measurement data. All channels are gavanically isolated from the KNX bus and can be configured independently from each other as input or output. The input voltage range is from 0-10V or from 2-10V, optionally the inputs can be operated as current loop with 0-20mA or 4-20mA. Each input can be parameterized individually with the ETS.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Analog In-/Output is suitable to control devices with 0-10V inputs and to catch 0-20mA/0-10V measurement data. All channels are gavanically isolated from the KNX bus and can be configured independently from each other as input or output. The input voltage range is from 0-10V or from 2-10V, optionally the inputs can be operated as current loop with 0-20mA or 4-20mA. Each input can be parameterized individually with the ETS.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- Each channel can be configured indepentently (In-/output)
- In/outputs are galvanically isolated from the bus
- In/outputs are galvanically connected together
- Voltage for output operation is generated inside the actuator
- No external power supply required
- Input operation 0-10V/2-10V or 0-20mA/4-20mA (switchable)
- Conversation of measuring unit and DPT can be parameterized
- Min/max function, wire breakage detection
- Threshold and traffic light function - Output functions 0-10V:
- Control by 1Byte, 2Byte float or 1Bit objects
- Day/night function to limit control value
- Emergency mode if given value fails - Flush mounted in socket
- Dimensions (W x H x D): 41mm x 41mm x 22mm
- Integrated bus coupling unit
Analog In-/Output 2-fold, Flush mounted, input voltage 0-12V/2-10V or current loop 0-20mA/4-20mA, output voltage 0-10V
AIO-0410V.xx (042.014)
AIO Analog IN-/Output
Description: The MDT Analog In-/Output is suitable to control devices with 0-10V inputs and to catch 0-20mA/0-10V measurement data. All channels are gavanically isolated from the KNX bus and can be configured independently from each other as input or output. The input voltage range is from 0-10V or from 2-10V, optionally the inputs can be operated as current loop with 0-20mA or 4-20mA. Each input can be parameterized individually with the ETS.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Analog In-/Output is suitable to control devices with 0-10V inputs and to catch 0-20mA/0-10V measurement data. All channels are gavanically isolated from the KNX bus and can be configured independently from each other as input or output. The input voltage range is from 0-10V or from 2-10V, optionally the inputs can be operated as current loop with 0-20mA or 4-20mA. Each input can be parameterized individually with the ETS.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- Each channel can be configured indepentently (In-/output)
- In/outputs are galvanically isolated from the bus
- In/outputs are galvanically connected together
- Voltage for output operation is generated inside the actuator
- No external power supply required
- Input operation 0-10V/2-10V or 0-20mA/4-20mA (switchable)
- Conversation of measuring unit and DPT can be parameterized
- Min/max function, wire breakage detection
- Threshold and traffic light function - Output functions 0-10V:
- Control by 1Byte, 2Byte float or 1Bit objects
- Day/night function to limit control value
- Emergency mode if given value fails - Flush mounted in socket
- Dimensions (W x H x D): 41mm x 41mm x 22mm
- Integrated bus coupling unit
Analog In-/Output 4-fold, input voltage 0-12V/2-10V or current loop 0-20mA/4-20mA, output voltage 0-10V
AKD-0201.xx (041.021)
AKD Dimming Actuator for dimming
Description: The MDT Dimming Actuator receives KNX/EIB telegrams and dimms/switches up to 2 independent electrical loads. Each channel can be operated manually via a push button.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Dimming Actuator receives KNX/EIB telegrams and dimms/switches up to 2 independent electrical loads. Each channel can be operated manually via a push button.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- 2W minimum load for LED lightning
- Push Button and LED indicator for each channel
- For dimming and switching incandescent lamps, HV halogen lamps,
LV halogen lamps (with conventional or suitable electronic transformers), dimmable energy saving lamps and LED lightning - Dimming operation in leading or trailing edge
- Short circuit and temperature protection with alarm, softstart
- Time functions (swich-on/switch-off delay, staircase light function)
- Each contact has an own supply phase/neutral conductor
Dimming Actuator, 2-fold, 4SU MDRC, 230VAC, 250W
AKD-0224V.xx (041.025)
Description: The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGB LED stripes.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany certified according to ISO 9001
- Extensive function extension
- Absolute and relative dimming for HSV color space and RGB
- Tunable White color temperature control
- Selectable dimming curve and PWM frequency up to 1000Hz
- Global and individual dimming speeds
- Individual and predefined sequences (e.g. TV Simulator)
- Repetition of sequences for automatic color control
- Suitable for 12/24V CV LED (Common Anode)
3A for each color channel (flush mounted device)
4A for each color channel (MDRC device) - Parallel operation of 2 channels
- Selectable load distribution:
AKD-0424R.02: 4 channels with 4A or 3 ch. with 3A/1 ch. 7A
AKD-0424V.02: 4 channels with 3A or 3 ch. with 2,25A/1 ch. 5,25A
AKD-0324V.02: 3 channels with 3A or 2 ch. with 2,25A/1 ch. 4,5A - Operating modes:
4 x White, RGB, RGBW, Tunable White (AKD-0424x.02) - Automatic color temperature control Dim2Warm
- Dynamic daylight control HCL (Human Centric Lighting)
- Automatic time-dependent dimming
- Day/night function
- Overcurrent and overtemperature supervision
- Intelligent 16A C-Load Relay output to control external
LED power supply
LED Controller flush mounted device, For white 12/24V LED stripes
AKD-0324V.xx (041.026)
Description: The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGB LED stripes.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany certified according to ISO 9001
- Extensive function extension
- Absolute and relative dimming for HSV color space and RGB
- Tunable White color temperature control
- Selectable dimming curve and PWM frequency up to 1000Hz
- Global and individual dimming speeds
- Individual and predefined sequences (e.g. TV Simulator)
- Repetition of sequences for automatic color control
- Suitable for 12/24V CV LED (Common Anode)
3A for each color channel (flush mounted device)
4A for each color channel (MDRC device) - Parallel operation of 2 channels
- Selectable load distribution:
AKD-0424R.02: 4 channels with 4A or 3 ch. with 3A/1 ch. 7A
AKD-0424V.02: 4 channels with 3A or 3 ch. with 2,25A/1 ch. 5,25A
AKD-0324V.02: 3 channels with 3A or 2 ch. with 2,25A/1 ch. 4,5A - Operating modes:
4 x White, RGB, RGBW, Tunable White (AKD-0424x.02) - Automatic color temperature control Dim2Warm
- Dynamic daylight control HCL (Human Centric Lighting)
- Automatic time-dependent dimming
- Day/night function
- Overcurrent and overtemperature supervision
- Intelligent 16A C-Load Relay output to control external
LED power supply
RGB LED Controller flush mounted device, For 12/24V RGB LED stripes
AKD-0401.xx (041.022)
AKD Dimming Actuator for dimming
Description: The MDT Dimming Actuator receives KNX/EIB telegrams and dimms/switches up to 4 independent electrical loads. Each channel can be operated manually via a push button.Production in Germany, certified according to ISO 9001
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Dimming Actuator receives KNX/EIB telegrams and dimms/switches up to 4 independent electrical loads. Each channel can be operated manually via a push button.Production in Germany, certified according to ISO 9001
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- 2W minimum load for LED lightning
- Push Button and LED indicator for each channel
- For dimming and switching incandescent lamps, HV halogen lamps,
LV halogen lamps (with conventional or suitable electronic transformers), dimmable energy saving lamps and LED lightning - Dimming operation in leading or trailing edge
- Short circuit and temperature protection with alarm, softstart
- Time functions (swich-on/switch-off delay, staircase light function)
- Each contact has an own supply phase/neutral conductor
Dimming Actuator, 4-fold, 8SU MDRC, 230VAC, 250W
AKD-0410V.xx (041.023)
AKD-0410V.02 Control device 4-fold, 4SU MDRC, 1-10V, with RGBW functionality
Description: The MDT Dimming Actuator receives KNX/EIB telegrams and dimms/switches up to 4 independent electrical loads. Each channel can be operated manually via a push button.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Dimming Actuator receives KNX/EIB telegrams and dimms/switches up to 4 independent electrical loads. Each channel can be operated manually via a push button.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- 2W minimum load for LED lightning
- Push Button and LED indicator for each channel
- For dimming and switching incandescent lamps, HV halogen lamps,
LV halogen lamps (with conventional or suitable electronic transformers), dimmable energy saving lamps and LED lightning - Dimming operation in leading or trailing edge
- Short circuit and temperature protection with alarm, softstart
- Time functions (swich-on/switch-off delay, staircase light function)
- Each contact has an own supply phase/neutral conductor
Control device 4-fold, 4SU MDRC, 1-10V, with RGBW functionality
AKD-0424R.xx (041.024)
Description: The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGB LED stripes.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany certified according to ISO 9001
- Extensive function extension
- Absolute and relative dimming for HSV color space and RGB
- Tunable White color temperature control
- Selectable dimming curve and PWM frequency up to 1000Hz
- Global and individual dimming speeds
- Individual and predefined sequences (e.g. TV Simulator)
- Repetition of sequences for automatic color control
- Suitable for 12/24V CV LED (Common Anode)
3A for each color channel (flush mounted device)
4A for each color channel (MDRC device) - Parallel operation of 2 channels
- Selectable load distribution:
AKD-0424R.02: 4 channels with 4A or 3 ch. with 3A/1 ch. 7A
AKD-0424V.02: 4 channels with 3A or 3 ch. with 2,25A/1 ch. 5,25A
AKD-0324V.02: 3 channels with 3A or 2 ch. with 2,25A/1 ch. 4,5A - Operating modes:
4 x White, RGB, RGBW, Tunable White (AKD-0424x.02) - Automatic color temperature control Dim2Warm
- Dynamic daylight control HCL (Human Centric Lighting)
- Automatic time-dependent dimming
- Day/night function
- Overcurrent and overtemperature supervision
- Intelligent 16A C-Load Relay output to control external
LED power supply
RGBW LED Controller, MDRC device, 4/8A, 4SU, for 12/24V RGBW LED
AKD-0424R2.xx (041.042)
The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany certified according to ISO 9001
- Comprehensive function extension
- Absolute and relative dimming for HSV colour space and RGB
- Tunable White color temperature control
- Selectable dimming curve and PWM frequency up to 1000Hz
- Global and individual dimming speeds
- Individual and predefined sequences (e.g. TV Simulator)
- Repetition of sequences for automatic colour control
- Suitable for 12/24V CV LED (Common Anode)
3A for each color channel (flush mounted device)
4A for each color channel (MDRC device) - Selectable load distribution:
AKD-0224V.02: 2 channels each 3A
AKD-0324V.02: 3 channels each 3A or 1 ch. 4,50A and 2 ch. 2,25A
AKD-0424V.02: 4 channels each 3A or 1 ch. 5,25A and 3 ch. 2,25A
AKD-0424R2.02: 4 channels each 2A or 1 ch. 3,5A and 3 ch. 1,5A
AKD-0424R.02: 4 channels each 4A or 1 ch. 7,0A and 3 ch. 3,0A - Parallel operation of 2 channels
- Operating modes: 4 x White, RGB, RGBW, Tunable White
- Automatic color temperature control Dim2Warm
- Dynamic daylight control HCL
(Human Centric Lighting) - Automatic time-dependent dimming
- Day/night function
- Overcurrent and overtemperature supervision
- Intelligent 16A C-Load Relay output to control external
LED power supply (not AKD-0424R2.02)
LED Controller 4-channel, 2/4A, 2SU, MDRC device, for 12/24V CV LED / 4 separate channels RGBW, TW
AKD-0424V.xx (041.027)
Description: The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGB LED stripes.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany certified according to ISO 9001
- Extensive function extension
- Absolute and relative dimming for HSV color space and RGB
- Tunable White color temperature control
- Selectable dimming curve and PWM frequency up to 1000Hz
- Global and individual dimming speeds
- Individual and predefined sequences (e.g. TV Simulator)
- Repetition of sequences for automatic color control
- Suitable for 12/24V CV LED (Common Anode)
3A for each color channel (flush mounted device)
4A for each color channel (MDRC device) - Parallel operation of 2 channels
- Selectable load distribution:
AKD-0424R.02: 4 channels with 4A or 3 ch. with 3A/1 ch. 7A
AKD-0424V.02: 4 channels with 3A or 3 ch. with 2,25A/1 ch. 5,25A
AKD-0324V.02: 3 channels with 3A or 2 ch. with 2,25A/1 ch. 4,5A - Operating modes:
4 x White, RGB, RGBW, Tunable White (AKD-0424x.02) - Automatic color temperature control Dim2Warm
- Dynamic daylight control HCL (Human Centric Lighting)
- Automatic time-dependent dimming
- Day/night function
- Overcurrent and overtemperature supervision
- Intelligent 16A C-Load Relay output to control external
LED power supply
RGBW LED Controller flush mounted device, For 12/24V RGBW LED stripes
AKH-0400.xx (041.032)
AKH Heating Actuator to control electrothermic valve drives
Description: The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical outputs. Each channel has its own LED indicator.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical outputs. Each channel has its own LED indicator.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- Extensive function extension
- Each channel controls up to 4 electrothermic valve drives (230VAC)
- Controllable with 1Bit (Switching/PWM) / 1Byte actuating variable or direct control with temperature value via KNX bus
- Integrated PI temperature controller (Heating and Cooling)
- Given value is stored at voltage failure
- 1Bit +/-, 1Byte or 2Byte absolute object to set the given value
- Comfort-, night- and frost protection. Summer-/winter operation
- Emergency operation if cyclic actuating variable fails
- Short circuit detection of connected load
- Detection of 230VAC mains voltage failure
- Objects for heating request and cyclic movement of the valves
- Extensive scene functions
- Minimum flow temperature
- Diagnostics for each channel with 14Byte plain text object
- Integrated bus coupling unit
Heating Actuator 4-fold, 2SU MDRC, to control electrothermic valve drives 24-230VAC
AKH-0600.xx (041.031)
The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical outputs.
Each channel has its own LED indicator.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Each channel has its own LED indicator.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- Extensive function extension
- Each channel controls up to 4 electrothermic valve drives (230VAC)
- Controllable with 1Bit (Switching/PWM) / 1Byte actuating variable
or direct control with temperature value via KNX bus - Integrated PI temperature controller (Heating and Cooling)
- Given value is stored at voltage failure
- 1Bit +/-, 1Byte or 2Byte absolute object to set the given value
- Comfort-, night- and frost protection. Summer-/winter operation
- Emergency operation if cyclic actuating variable fails
- Short circuit detection of connected load
- Detection of 230VAC mains voltage failure
- Objects for heating request and cyclic movement of the valves
- Extensive scene functions
- Minimum flow temperature
- Diagnostics for each channel with 14Byte plain text object
- Quick application download (long frame support for ETS5)
Heating Actuator 6-fold, 3SU MDRC, to control electrothermic valve drives 24-230VAC
AKH-0800.xx (041.033)
AKH Heating Actuator to control electrothermic valve drives
Description: The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical outputs. Each channel has its own LED indicator.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical outputs. Each channel has its own LED indicator.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- Extensive function extension
- Each channel controls up to 4 electrothermic valve drives (230VAC)
- Controllable with 1Bit (Switching/PWM) / 1Byte actuating variable or direct control with temperature value via KNX bus
- Integrated PI temperature controller (Heating and Cooling)
- Given value is stored at voltage failure
- 1Bit +/-, 1Byte or 2Byte absolute object to set the given value
- Comfort-, night- and frost protection. Summer-/winter operation
- Emergency operation if cyclic actuating variable fails
- Short circuit detection of connected load
- Detection of 230VAC mains voltage failure
- Objects for heating request and cyclic movement of the valves
- Extensive scene functions
- Minimum flow temperature
- Diagnostics for each channel with 14Byte plain text object
- Integrated bus coupling unit
Heating Actuator 8-fold, 4SU MDRC, to control electrothermic valve drives 24-230VAC
AKI-0416.xx (041.036)
AKI Industrial Switch Actuators with bistable relays, for heavy C-loads
Description: The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 4 independent electrical loads. Each output uses a bistable relay and can be operated manually via a push button. A green LED indicates the switching status of each output.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 4 independent electrical loads. Each output uses a bistable relay and can be operated manually via a push button. A green LED indicates the switching status of each output.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- Extensive function extension
- Lockable manual operation and LED indicator for each channel
- NO and NC contact operation
- Status response at manually operation
- Time functions (switch-on/switch-off delay)
- Extensive staircase light and impulse functions
- Extended logical and scene functions for each channel
- Extended status functions (inverted, cyclic, at block)
- Treshold switch (Byte/2Byte/2Byte float)
- Hour meter for switching
- Priority/forced operation with automatic release time
- Separate power supply terminals for each channel
- Power supply via KNX bus
- Quick application download (long frame support for ETS5)
Switch Actuator 4-fold, 4SU MDRC, 230VAC, 16/20A, C-Load 200µF
AKI-0816.xx
AKI Industrial Switch Actuators with bistable relays, for heavy C-loads
Description: The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 8 independent electrical loads. Each output uses a bistable relay and can be operated manually via a push button. A green LED indicates the switching status of each output.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 8 independent electrical loads. Each output uses a bistable relay and can be operated manually via a push button. A green LED indicates the switching status of each output.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- Extensive function extension
- Lockable manual operation and LED indicator for each channel
- NO and NC contact operation
- Status response at manually operation
- Time functions (switch-on/switch-off delay)
- Extensive staircase light and impulse functions
- Extended logical and scene functions for each channel
- Extended status functions (inverted, cyclic, at block)
- Treshold switch (Byte/2Byte/2Byte float)
- Hour meter for switching
- Priority/forced operation with automatic release time
- Separate power supply terminals for each channel
- Power supply via KNX bus
- Quick application download (long frame support for ETS5)
Switch Actuator 8-fold, 8SU MDRC, 230VAC, 16/20A, C-Load 200µF
AKI-1216.xx (041.056)
AKI Industrial Switch Actuators with bistable relays, for heavy C-loads
Description: The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads. Each output uses a bistable relay and can be operated manually via a push button. A green LED indicates the switching status of each output.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads. Each output uses a bistable relay and can be operated manually via a push button. A green LED indicates the switching status of each output.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- Extensive function extension
- Lockable manual operation and LED indicator for each channel
- NO and NC contact operation
- Status response at manually operation
- Time functions (switch-on/switch-off delay)
- Extensive staircase light and impulse functions
- Extended logical and scene functions for each channel
- Extended status functions (inverted, cyclic, at block)
- Treshold switch (Byte/2Byte/2Byte float)
- Hour meter for switching
- Priority/forced operation with automatic release time
- Separate power supply terminals for each channel
- Power supply via KNX bus
- Quick application download (long frame support for ETS5)
Switch Actuator 12-fold, 12SU MDRC, 230VAC, 16/20A, C-Load 200µF
AKK-01UP.xx (041.005)
AKK Flush mounted Switch Actuators
Description: The flush-mounted version of the MDT Switch Actuator AKK with a wide range of functions is suitable for small to medium loads. This is the perfect actuator for decentralised switching of individual consumers directly from the switch box.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The flush-mounted version of the MDT Switch Actuator AKK with a wide range of functions is suitable for small to medium loads. This is the perfect actuator for decentralised switching of individual consumers directly from the switch box.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Function extension
- NO and NC contact operation
- Time functions (switch-on/switch-off delay)
- Extensive staircase light and impulse functions
- Status response (active/passive) for each channel
- Logical linking of binary data
- Extendend scene functions for each channel
- Central switching functions and blocking for forced operation
- Adjustable behavior in case of bus voltage failure (AKK-01UP.02 only)
- Adjustable behavior in case of bus voltage return
- Flush mounted in an installation box
- Dimensions (W x H x D): 41mm x 41mm x 22mm
- Quick application download (long frame support with ETS5 or higher)
- Production in Germany, certified according to ISO 9001
Switch Actuator 1-fold, Flush mounted, 230VAC, 16A
AKK-0216.xx (041.001)
AKK Compact Switch Actuators with bistable relays
Description: The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 2 independent electrical loads. Each output uses a bistable relay.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 2 independent electrical loads. Each output uses a bistable relay.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- Function extension
- Push Button and LED indicator for each channel
- NO and NC contact operation
- Status response at manually operation
- Time functions (switch-on/switch-off delay
- Extensive staircase light and impulse functions
- Status response (active/passive) for each channel
- Logical linking of binary data
- Extendend scene functions for each channel
- Central switching functions and block functions
- Adjustable behavior in case of bus voltage failure or return
- Power supply via KNX bus
- Quick application download (long frame support for ETS5)
Switch Actuator, 2-fold, 2SU MDRC, 230VAC, 16A
AKK-02UP.xx (041.006)
AKK Flush mounted Switch Actuators
Description: The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 2 independent electrical loads. Each output uses a monostable relay.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 2 independent electrical loads. Each output uses a monostable relay.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- Function extension
- NO and NC contact operation
- Time functions (switch-on/switch-off delay)
- Extensive staircase light and impulse functions
- Status response (active/passive) for each channel
- Logical linking of binary data
- Extendend scene functions for each channel
- Central switching functions and block functions
- Adjustable behavior in case of bus voltage failure or return
- Flush mounted in socket
- Dimensions (W x H x D): 41mm x 41mm x 22mm
- Quick application download (long frame support for ETS5)
Switch Actuator 2-fold, Flush mounted, 230VAC, 10A
AKK-03UP.xx (041.007)
AKK Heating, flush mounted Switch Actuator with fancoil operation
Description: The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 3 independent electrical loads
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 3 independent electrical loads
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- Control of 3-speed fans/ventilator convectors
(AKK-04FC-02: 4-speed fans/ventilator convectors) - Outputs are locked against each other
- Direct operation by three 1Bit objects or a single 1Bit object (+/-)
- Automatic operation by 1Byte control value (0-100%)
- Suitable for 2-pipe/4-pipe systems
- Output objects to control valves for heating/cooling
- Day/Night function to limit fan speed at night
- Emergency operation if actuating variable fails
- NO and NC contact operation
- Time functions (switch-on/switch-off delay)
- Staircase light function with adjustable warning time
- Status response (active/passive) for each channel
- Logical linking of binary data, 8 scenes per channel
- Central switching functions and block functions
- Adjustable behaviour in case of bus voltage failure or return
- Quick application download (long frame support for ETS5)
Switch Actuator, 3-fold with Fancoil operation, Flush mounted, 230VAC, 10A
AKK-0416.xx (041.002)
AKK Compact Switch Actuators with bistable relays
Description: The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 4 independent electrical loads. Each output uses a bistable relay.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 4 independent electrical loads. Each output uses a bistable relay.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- Function extension
- Push Button and LED indicator for each channel
- NO and NC contact operation
- Status response at manually operation
- Time functions (switch-on/switch-off delay
- Extensive staircase light and impulse functions
- Status response (active/passive) for each channel
- Logical linking of binary data
- Extendend scene functions for each channel
- Central switching functions and block functions
- Adjustable behavior in case of bus voltage failure or return
- Power supply via KNX bus
- Quick application download (long frame support for ETS5)
Switch Actuator, 4-fold, 2SU MDRC, 230VAC, 16A
AKK-04FC.xx (041.008)
AKK Heating, flush mounted Switch Actuator with fancoil operation
Description: The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 4 independent electrical loads.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 4 independent electrical loads.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- Control of 4-speed fans/ventilator convectors
- Outputs are locked against each other
- Direct operation by three 1Bit objects or a single 1Bit object (+/-)
- Automatic operation by 1Byte control value (0-100%)
- Suitable for 2-pipe/4-pipe systems
- Output objects to control valves for heating/cooling
- Day/Night function to limit fan speed at night
- Emergency operation if actuating variable fails
- NO and NC contact operation
- Time functions (switch-on/switch-off delay)
- Staircase light function with adjustable warning time
- Status response (active/passive) for each channel
- Logical linking of binary data, 8 scenes per channel
- Central switching functions and block functions
- Adjustable behaviour in case of bus voltage failure or return
- Quick application download (long frame support for ETS5)
Switch Actuator 4-fold with Fancoil operation, 2SU MDRC, 230VAC, 10A
AKK-0816.xx (041.003)
AKK Compact Switch Actuators with bistable relays
Description: The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 8 independent electrical loads. Each output uses a bistable relay.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 8 independent electrical loads. Each output uses a bistable relay.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- Function extension
- Push Button and LED indicator for each channel
- NO and NC contact operation
- Status response at manually operation
- Time functions (switch-on/switch-off delay
- Extensive staircase light and impulse functions
- Status response (active/passive) for each channel
- Logical linking of binary data
- Extendend scene functions for each channel
- Central switching functions and block functions
- Adjustable behavior in case of bus voltage failure or return
- Power supply via KNX bus
- Quick application download (long frame support for ETS5)
Switch Actuator, 8-fold, 4SU MDRC, 230VAC, 16A
AKK-1616.xx (041.004)
AKK Compact Switch Actuators with bistable relays
Description: The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 16 independent electrical loads. Each output uses a bistable relay.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 16 independent electrical loads. Each output uses a bistable relay.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- Function extension
- Push Button and LED indicator for each channel
- NO and NC contact operation
- Status response at manually operation
- Time functions (switch-on/switch-off delay
- Extensive staircase light and impulse functions
- Status response (active/passive) for each channel
- Logical linking of binary data
- Extendend scene functions for each channel
- Central switching functions and block functions
- Adjustable behavior in case of bus voltage failure or return
- Power supply via KNX bus
- Quick application download (long frame support for ETS5)
Switch Actuator, 16-fold, 8SU MDRC, 230VAC, 16A
AKK-2416.xx (041.040)
AKK Compact Switch Actuators with bistable relays
Description: The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads. Each output uses a bistable relay.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads. Each output uses a bistable relay.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- Function extension
- Push Button and LED indicator for each channel
- NO and NC contact operation
- Status response at manually operation
- Time functions (switch-on/switch-off delay
- Extensive staircase light and impulse functions
- Status response (active/passive) for each channel
- Logical linking of binary data
- Extendend scene functions for each channel
- Central switching functions and block functions
- Adjustable behavior in case of bus voltage failure or return
- Power supply via KNX bus
- Quick application download (long frame support for ETS5)
Switch Actuator, 24-fold, 12SU MDRC, 230VAC, 16A
AKS-01UP.xx (041.054)
AKS Flush mounted Standard Switch Actuator
Description: The MDT Switch Actuator for flush mounting receives KNX / EIB telegrams and switches 1 or 2 independent electrical loads. Each output uses a bistable relay.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Switch Actuator for flush mounting receives KNX / EIB telegrams and switches 1 or 2 independent electrical loads. Each output uses a bistable relay.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Comprehensive application
- NO and NC contact operation
- Extended status functions (inverted, cyclic, with block)
- Time functions (switch-on / switch-off delay)
- Extensive staircase light and impulse functions
- Extended logic and scene functions
- Threshold switch (Byte / 2 Byte / 2 Byte float)
- Hour meter for switching
- Priority / forced operation with automatic release time
- Quick application download (long frame support from ETS 5)
- Flush mounted in an installation box
- Dimensions (W x H x D): 41 mm x 41 mm x 22 mm
Switch Actuator 1-fold, Flush mounted, 140μF C-Load, 16A
AKS-0210.xx (041.062)
The new AKS series offers more channels at less space, so lower costs per channel.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- Space saving design
- Comprehensive function extension
- Lockable manual operation and LED indicator for each channel
- NO and NC contact operation
- Status response at manually operation
- Time functions (switch-on/switch-off delay, staircase light functions)
- Extended logical and scene functions for each channel
- Extended status functions (inverted, cyclic, at block)
- Treshold switch (Byte/2Byte/2Byte float)
- Hour meter for switching
- Priority/forced operation with automatic release time
- Quick application download (long frame support for ETS5)
- Power supply via KNX bus
- Integrated bus coupling unit
Switch Actuator 2-fold, 2SU MDRC, 230VAC, 10A, C-Load 140µF
AKS-0216.xx (041.046)
AKS Standard Switch Actuators with bistable relays
Description: The new AKS series offers more channels at less space, so lower costs per channel. The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 2 independent electrical loads. Each output uses a bistable relay and can be operated manually via a push button. A green LED indicates the switching status of each output.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The new AKS series offers more channels at less space, so lower costs per channel. The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 2 independent electrical loads. Each output uses a bistable relay and can be operated manually via a push button. A green LED indicates the switching status of each output.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- Space saving by ideal form factor
- Extensive function extension
- Lockable manual operation and LED indicator for each channel
- NO and NC contact operation
- Status response at manually operation
- Time functions (switch-on/switch-off delay, staircase light functions)
- Extended logical and scene functions for each channel
- Extended status functions (inverted, cyclic, at block)
- Treshold switch (Byte/2Byte/2Byte float)
- Hour meter for switching
- Priority/forced operation with automatic release time
- Separate power supply terminals for each channel
- Power supply via KNX bus
- Integrated bus coupling unit
Switch Actuator 2-fold, 2SU MDRC, 230VAC, 16A, C-Load 140µF
AKS-02UP.xx (041.055)
AKS Flush mounted Standard Switch Actuator
Description: The MDT Switch Actuator for flush mounting receives KNX / EIB telegrams and switches 1 or 2 independent electrical loads. Each output uses a bistable relay.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
Description: The MDT Switch Actuator for flush mounting receives KNX / EIB telegrams and switches 1 or 2 independent electrical loads. Each output uses a bistable relay.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Comprehensive application
- NO and NC contact operation
- Extended status functions (inverted, cyclic, with block)
- Time functions (switch-on / switch-off delay)
- Extensive staircase light and impulse functions
- Extended logic and scene functions
- Threshold switch (Byte / 2 Byte / 2 Byte float)
- Hour meter for switching
- Priority / forced operation with automatic release time
- Quick application download (long frame support from ETS 5)
- Flush mounted in an installation box
- Dimensions (W x H x D): 41 mm x 41 mm x 22 mm
Switch Actuator 2-fold, Flush mounted, 140μF C-Load, 16A
AKS-0410.xx (041.045)
The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 11 independent electrical loads. Each output uses a bistable relay and can be operated manually via a push button.
Για περισσότερες πληροφορίες στα υλικά MDT www.mdt-knx.gr
- Production in Germany, certified according to ISO 9001
- Space saving design
- Comprehensive function extension
- Lockable manual operation and LED indicator for each channel
- NO and NC contact operation
- Status response at manually operation
- Time functions (switch-on/switch-off delay, staircase light functions)
- Extended logical and scene functions for each channel
- Extended status functions (inverted, cyclic, at block)
- Treshold switch (Byte/2Byte/2Byte float)
- Hour meter for switching
- Priority/forced operation with automatic release time
- Quick application download (long frame support for ETS5)
- Power supply via KNX bus
- Integrated bus coupling unit
Switch Actuator 4-fold, 4SU MDRC, 230VAC, 10A, C-Load 140µF